Precautions for maintenance of faucets
1. When the air temperature is below zero degrees Celsius, if the handle of the faucet feels abnormal, it is necessary to scald the bathroom product with hot water until the feel is normal before use. Otherwise, it will affect the service life of the faucet valve core.
2. The phenomenon of dripping water after the faucet is closed is caused by the presence of excess water in the inner chamber of the faucet after it is closed, which is a normal phenomenon. If there is dripping after ten minutes for a long time, it is considered a leakage, indicating that the product has a quality issue.
3. Because water contains trace amounts of carbonate, which easily evaporates on the metal surface and forms scale, it can corrode the surface of the faucet, thereby affecting its cleanliness and service life. So it is important to frequently wipe the surface of the faucet with a soft cotton cloth or sponge with neutral soap water (note: do not wipe with corrosive or acidic substances), and then dry the surface with a soft cloth. Avoid using metal wire balls or scouring cloths with harder particles. Additionally, do not collide with hard objects to damage the surface of the water nozzle.
4. Do not use too much force to turn on and off the faucet, simply roll it gently along the way. Even traditional faucets do not require a lot of effort to tighten. Especially, do not use the handle as a handrail to support or use it. Many people are accustomed to using some force to turn off the faucet tightly after using it, which is not advisable. This not only does not prevent water leakage, but also causes damage to the sealing valve, resulting in the faucet not being tightly closed.
5. When the water flow decreases, impurities need to be removed. If a decrease in water output is found under a water pressure of no less than 0.02mpa, it is possible that the faucet is blocked. The solution is to gently twist the sieve cover of the water nozzle at the outlet of the faucet with a wrench, clean the impurities, and then carefully install it. Generally, it can be restored to its original state.
Article source: Kaiping water heater faucet& Nbsp; http://www.ray123.cn/
-
12-06
Manufacturer of water heater: Maintenance methods for water heaters
Maintenance methods for water heatersA water boiler is a type of drinking water equipment that uses electricity or gas to produce boiled water. The machine is easy to operate, has a beautiful appearan
-
11-11
Water heater manufacturer: advantages of stepper electric water heaters
The advantages of stepper electric water heatersMany people are currently quite familiar with electric water heaters, and we can see their traces in many places such as enterprises, factories, schools
-
10-14
Is the "high flux" water purifier really good
Looking at the water purification market in the past two years, high-frequency words are undoubtedly "high flux". Haofan Water Purification Enterprise regards "high flux non tank pure water machine" a
-
02-19
What is the possibility that the faucet of the water heater cannot discharge water?
1. It may be due to poor contact of the water level wire, with the plug on the circuit board under the machine and unplugged from the beginning (the overflow water flow is large, which is the problem)